How To Fix Slow Usb Transfer Speeds Linux?
Share
Sign Up to our social questions and Answers Engine to ask questions, answer people’s questions, and connect with other people.
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
1. Check your USB speed setting:
In some distributions of Linux, your USB speed setting may be set too low. You can check this by running the command “cat /sys/module/usbcore/parameters/speed”. If the output is “1”, then your USB speed is set to low-speed. You can change the setting to high-speed by running the command “echo 2 > /sys/module/usbcore/parameters/speed”.
2. Disable power management on your USB ports:
Power management on USB ports can reduce the speed of data transfers. You can disable this by running the command “echo -1 > /sys/module/usbcore/parameters/autosuspend”.
3. Check your USB connection:
If your USB connection is faulty or not correctly connected, it can cause slow transfer speeds. Check the connection and make sure it is firmly in place.
4. Upgrade your USB drivers:
If your USB drivers are outdated, they may not be able to handle the speed of your USB devices. You can check for updates and install the latest versions.
5. Check for hardware conflicts:
If there are conflicts between your USB devices and other hardware in your system, it could result in slow transfer speeds. Use the command “lspci -v” to check for any hardware conflicts.