Refer To The Exhibit. What Can Be Concluded About Network 192.168.4.0 In The R2 Routing Table?

 Refer to the exhibit. What can be concluded about network 192.168.4.0 in the R2 routing table?

• Along with the summary LSAs, the network was learned from an ABR.
• With the GigabitEthernet0/0 interface, the network is reached.
• The network was learned from a router within the same area as R2.
• It can move the traffic toward an external network as well.

Answer: the label O defines in a network that the route which is displayed by another router is present in the area together, in the routing table. And in the scenario, the exit

 interface is GigabitEthernet0/1.the assigned O IA determine that the entry was from the interarea LSA which forms from an ABR. while the label O*E2 determines the outside networks. in this case, the network designation 0.0.0.0/0 determines that the outer network is the route for the traffic which moves to an external network and the setting is by default. 

192.168.4.0 network

The private IP address 192.168.4.0 is designed for the internal private network.it is used by routers, modems, and many kinds of devices. The router admin password and the login IP 192.168.4.0 is the IP address that is used by the router and they act as the gateway of the point of access. The router within the IP address is given access to the administrator of the network to determine their networks etc. On can maintain the security, network IP QoS DNS, proxy, LAN DSL, WAN, WPS, and many other options. Let’s check about the Router admin login in the following section:

The IANA registers the IP address 192.168.4.0 as the private address for a private network 192.168.4.0/24.in the private region the IP address is not designated with any specific organization and everyone might use the IP address without any permission of the regional internet registry which is shown in RFC 1918, and it is different from the local or public IP address. The access to the admin page happens by writing the 192.168.4.0 in the web browser bar and checking the log in detail in the display table.

Steps to the login 

The software router modification might happen with access to the admin router through the 192.168.4.0 IP address. The steps for the login are defined in the following:

• For the configuration change the setting or modify the password of the router you want to login. Type the 192.168.4.0 address in the URL of the browser.
• If an error displays it shows that 192.168.4.0 is not the correct IP address of the router .type with an autocomplete.
• If you are not able to change the username or password which is the default the try to cope up with the password given to you by default.