What Is Enable Mode In Cisco?

What Is Enable Mode in Cisco?

Cisco router mode is a 3-device layer used to transfer packets from one network to another network Based on the destination Internet Protocol address, Cisco mode forwards packets using one of its ports It can find the best route using routing tables between the source and destination networks. Here we discuss the different modes of the cisco router.

Modes of cisco router:

There are different five modes in the cisco router:

• User extended mode:

Extended mode is limited to certain monitoring commands. As soon as the message appears on the interface and press enter the prompt will pop up this is called execution mode.

• Interface configuration mode:

In this mode, only the configuration is done. Assigning the internet protocol address to the interface put forward the interface is the common function of this model.

• Confidential mode:

As we allow the user mode, we enter this mode where we can change the configuration of the cisco router. Different commands such as showing the IP interface, and processing configuration run on the privileged mode which is used for rectifying purposes.

• ROMMON mode:

By interfering with the boot process of the user we can enter this mode. It is the BIOS mode of personal computers. Normally enter in this mode while password recovery process on the device like TFTP server.

• Global configuration mode:

We enter into the global configuration mode by typing the router terminal into the user mode. Commands in this mode are called global commands and have an influence on the running configuration of the router. In this mode, each unit can be configured separately. For example, set up the passwords and enable secrets, allowing the routing protocol. Every time when you want to change something you will need this global configuration mode.