How To Connect a Smart Switch?
Share
Sign Up to our social questions and Answers Engine to ask questions, answer people’s questions, and connect with other people.
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
1. Turn off the power to the switch at the circuit breaker.
2. Remove the existing switch from the wall.
3. Connect the wires on the existing switch to the corresponding wires on the smart switch.
4. Attach the mounting plate and secure it to the wall with the provided screws.
5. Mount the smart switch onto the mounting plate.
6. Connect the smart switch to your home Wi-Fi network.
7. Use an app to control the switch remotely.
8. Turn the power back on at the circuit breaker.
1. Install the smart switch according to the manufacturer‘s instructions. This should include turning off power to the circuit at the circuit breaker.
2. Route the wires from the wall box to the switch and strip the sheathing from each wire.
3. Identify the wires in the wall box and on the switch side. The smart switch must be installed with the appropriate hot, neutral, and ground connections for it to work safely and properly.
4. Connect the identified wires to the terminals on the smart switch, making sure that the connections are secure and tight.
5. Turn the power back on at the circuit breaker and test the switch.
1. Turn off the power to the switch at the circuit breaker.
2. Remove the existing switch and disconnect the wires.
3. Connect the wires to the terminals of the new smart switch. Make sure to match the wire colors appropriately.
4. Use the provided screws to secure the smart switch to the wall box.
5. Turn the power back on at the circuit breaker.
6. Install the appropriate app onto your smartphone or tablet.
7. Follow the instructions for connecting the switch in the app.
8. Test the switch to make sure it is working correctly.