How To Setup Modem Without Coax Cable?
Share
Sign Up to our social questions and Answers Engine to ask questions, answer people’s questions, and connect with other people.
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
If you don’t have a coax cable, you can still setup your modem by using an Ethernet or USB cable.
1. Connect one end of the Ethernet cable or USB cable to the modem.
2. Connect the other end of the cable to your computer.
3. Power on the modem and follow the instructions on the manual to complete the setup.
4. Open a web browser and enter the IP address of the modem in the address bar.
5. Login to the modem’s web-based interface with the default username and password.
6. Configure the modem as per your ISP’s instructions.
7. Save the changes and restart the modem.
8. Your modem should now be set up and ready to use.
1. Connect your modem to the internet using an Ethernet cable. Plug one end of the Ethernet cable into the back of the modem, and the other end into the Ethernet port on your computer.
2. Power on the modem. Check to make sure all the lights on the modem are lit up before continuing.
3. Open your web browser and enter the modem’s IP address into the address bar. The IP address is usually printed on the bottom of the modem.
4. Enter the username and password that came with the modem.
5. Configure the modem’s settings. You can usually find the settings by clicking the “Configuration” or “Setup” tab in the web browser.
6. Save the settings and exit the modem’s web browser. Your modem should now be setup and connected to the internet.