Sign Up to our social questions and Answers Engine to ask questions, answer people’s questions, and connect with other people.
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
Which Two Parts Are Components Of An Ipv4 Address? (Choose Two.)?
1. Network Identifier 2. Host Identifier
1. Network Identifier
See less2. Host Identifier
How To Put Ethernet Cable In Laptop?
1. Check the back of your laptop for an Ethernet port. It should look like a trapezoid with 8 pins inside. 2. Insert the Ethernet cable into the Ethernet port. Make sure the clip is on the side of the cable that corresponds with the side of the port. 3. Plug the other end of the Ethernet cable intoRead more
1. Check the back of your laptop for an Ethernet port. It should look like a trapezoid with 8 pins inside.
2. Insert the Ethernet cable into the Ethernet port. Make sure the clip is on the side of the cable that corresponds with the side of the port.
3. Plug the other end of the Ethernet cable into your router or modem.
4. Configure your network settings. Your computer should recognize the cable and automatically configure itself.
5. Test the connection by opening your web browser and trying to access a website. If you are connected properly, it should load.
See lessWhat Is The Difference Between a Switch And a Router?
A switch and a router are both network devices that allow different types of devices to connect with each other on a network. The main difference between a switch and a router is that a switch is used to connect devices within a Local Area Network (LAN), while a router is used to connect multiple neRead more
A switch and a router are both network devices that allow different types of devices to connect with each other on a network.
The main difference between a switch and a router is that a switch is used to connect devices within a Local Area Network (LAN), while a router is used to connect multiple networks together, enabling communication among them. A switch operates at the physical layer (layer 2) and data link layer (layer 2) of the OSI model, whereas a router operates at the network layer (layer 3). A switch creates a single broadcast domain, allowing all connected devices to communicate with each other, while a router divides broadcast domains, which limits the communication between different networks. Furthermore, a switch is used to broadcast packets within a single network while a router is used to route packets between different networks.
See lessWhich Of The Following Best Describes An Email Security Gateway?
An email security gateway is a security software system that is deployed at the perimeter of an organization's email system to control, monitor, and filter incoming and outgoing email messages. It can be used to block spam, phishing attacks, malicious attachments, and other threats. The gateway alsoRead more
An email security gateway is a security software system that is deployed at the perimeter of an organization’s email system to control, monitor, and filter incoming and outgoing email messages. It can be used to block spam, phishing attacks, malicious attachments, and other threats. The gateway also provides data loss prevention capabilities, archiving, and encryption of outbound emails.
See lessHow To Mute Zoom Audio Output Mac?
1. Open the System Preferences on your Mac. 2. Select Sound. 3. Choose the Output tab. 4. From the list of available devices, select the output device you would like to mute. 5. Check the Mute checkbox at the bottom of the window.
1. Open the System Preferences on your Mac.
See less2. Select Sound.
3. Choose the Output tab.
4. From the list of available devices, select the output device you would like to mute.
5. Check the Mute checkbox at the bottom of the window.
How To Shut Port On Cisco Switch?
1. Connect to the switch using a terminal emulator such as PuTTY. 2. Log in with an account that has administrative privileges. 3. Enter global configuration mode by typing "configure terminal" at the prompt. 4. Enter interface configuration mode for the port you wish to shut down by typing "interfaRead more
1. Connect to the switch using a terminal emulator such as PuTTY.
2. Log in with an account that has administrative privileges.
3. Enter global configuration mode by typing “configure terminal” at the prompt.
4. Enter interface configuration mode for the port you wish to shut down by typing “interface [port number]” at the prompt.
5. Shut down the port by typing “shutdown” at the prompt.
6. To confirm the port is shut down enter the “show interfaces status” command at the prompt.
7. Exit out of interface configuration mode by typing “end” at the prompt.
8. Verify your changes by typing “show running-config” at the prompt.
9. Save your changes by typing “copy running-config startup-config” at the prompt.
10. Finally, exit out of the switch by typing “exit” at the prompt.
See lessHow To Find a Router Id?
To find a router’s ID, access the router configuration page (typically through a web browser). On the home page of the router, there should be an “id” or “device id” field that will display the router’s identity. Alternatively, use the command prompt in Windows to type “ipconfig/all” and search forRead more
To find a router’s ID, access the router configuration page (typically through a web browser). On the home page of the router, there should be an “id” or “device id” field that will display the router’s identity. Alternatively, use the command prompt in Windows to type “ipconfig/all” and search for the “Physical Address” line, which should contain the ID. On Unix or Linux systems, the command is “ifconfig”, which should display the MAC address, which serves as the router’s ID.
See lessHow To Check If Ftp Is Active Or Passive?
To check if an FTP connection is active or passive, use the command "STATUS" from the FTP command line. This will return information about the current status of the connection, including whether it is active or passive.
To check if an FTP connection is active or passive, use the command “STATUS” from the FTP command line. This will return information about the current status of the connection, including whether it is active or passive.
See lessHow To Know If Your Email Has Been Hacked?
1. Unexpected password change - If you suddenly find yourself locked out of your account, it’s a sign that either you or someone else has changed the password to lock you out. 2. Unexpected sent emails - If you receive an email from someone in your address book, yet you know you didn't send it, thisRead more
1. Unexpected password change – If you suddenly find yourself locked out of your account, it’s a sign that either you or someone else has changed the password to lock you out.
2. Unexpected sent emails – If you receive an email from someone in your address book, yet you know you didn’t send it, this could mean your account was hacked.
3. Unexpected contact requests – If someone is receiving emails from you that you never sent, it may be a sign that your account has been hacked.
4. Suspicious activity logs – Reviewing recent activity on your email account can show signs of suspicious behavior like unknown logins from unfamiliar IP addresses.
5. Unusual spam – If you are suddenly receiving a barrage of spam emails, it could be a sign your account has been compromised.
See lessHow To Connect To a Router Without The Password?
It is not possible to connect to a router without the password. All routers are password protected and require you to enter a valid password in order to access the settings and features of the router.
It is not possible to connect to a router without the password. All routers are password protected and require you to enter a valid password in order to access the settings and features of the router.
See less