Sign Up to our social questions and Answers Engine to ask questions, answer people’s questions, and connect with other people.
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
How To Change Cisco Switch Password?
1. Log into the switch using the privileged EXEC mode: a. Connect your PC to the switch using the console port and open a terminal emulation program such as HyperTerminal. b. Enter your username and password. 2. Once logged in, enter the command “enable” to enter privileged EXEC mode. 3. Enter the cRead more
1. Log into the switch using the privileged EXEC mode:
a. Connect your PC to the switch using the console port and open a terminal emulation program such as HyperTerminal.
b. Enter your username and password.
2. Once logged in, enter the command “enable” to enter privileged EXEC mode.
3. Enter the command “configure terminal” to enter configuration mode.
4. Enter the command “enable secret new_password” where new_password is the new password.
5. To save the changes, enter the command “exit” and then “write memory”.
6. Exit the privileged EXEC mode by entering the command “exit”.
See lessHow To Change Native Vlan On Cisco Switch?
To change the native VLAN on a Cisco switch, you'll need to use the following command: 1. Login to the switch and enter configuration mode: conf t 2. Set the native VLAN for the switch: interface vlan <native VLAN number> 3. Set the native VLAN for all switch ports: interface range <port raRead more
To change the native VLAN on a Cisco switch, you’ll need to use the following command:
1. Login to the switch and enter configuration mode:
conf t
2. Set the native VLAN for the switch:
interface vlan <native VLAN number>
3. Set the native VLAN for all switch ports:
interface range <port range> switchport trunk native vlan <native VLAN number>
4. Save the changes:
wr mem
5. Exit configuration mode:
exit
See lessHow To Redirect Ports From Router To Computer?
1. Log into your router’s administrative console. This can usually be done by typing 192.168.1.1 into your web browser’s address bar. 2. Enter your router’s username and password. If you haven’t changed these from the default settings, you can usually find them in the router’s user manual. 3. Find tRead more
1. Log into your router’s administrative console. This can usually be done by typing 192.168.1.1 into your web browser’s address bar.
2. Enter your router’s username and password. If you haven’t changed these from the default settings, you can usually find them in the router’s user manual.
3. Find the port forwarding section of your router. This can usually be found under the Advanced or Security section.
4. Set up a new port forwarding rule. This will require you to enter the port or ports that you wish to forward, the IP address of the computer you wish to forward the ports to, and the protocol (TCP or UDP).
5. Save your settings. These changes will take effect immediately, so you don’t need to reboot your router.
See lessHow To Rollback To Previous Ios Version?
Unfortunately, Apple does not allow users to roll back to a previous version of iOS. Once you have upgraded to a newer version, you will not be able to go back. The only way to get back to a previous version is to use a backup from before the upgrade.
Unfortunately, Apple does not allow users to roll back to a previous version of iOS. Once you have upgraded to a newer version, you will not be able to go back. The only way to get back to a previous version is to use a backup from before the upgrade.
See lessHow To Enable Dhcp On Ethernet?
To enable DHCP on Ethernet, you will need to access the network settings of your computer or device. Look for the Network and Sharing Center, then select Change adapter settings. Right-click on your Ethernet adapter and select Properties. Select the Internet Protocol Version 4 (TCP/IPv4) option andRead more
To enable DHCP on Ethernet, you will need to access the network settings of your computer or device. Look for the Network and Sharing Center, then select Change adapter settings. Right-click on your Ethernet adapter and select Properties. Select the Internet Protocol Version 4 (TCP/IPv4) option and click the Properties button. In the new window, select the radio button next to “Obtain an IP address automatically” or “Obtain IP address automatically” and click OK. Your Ethernet adapter should now be configured to use DHCP.
See lessHow To Convert Old Router Into Wifi Extender?
1. Check the compatibility: You'll need a router that is compatible with your existing router. Check the list of compatible routers for your existing router's manufacturer. 2. Update the firmware: Make sure you update the firmware on the old router that you want to use as a Wi-Fi extender. 3. ConnecRead more
1. Check the compatibility: You’ll need a router that is compatible with your existing router. Check the list of compatible routers for your existing router’s manufacturer.
2. Update the firmware: Make sure you update the firmware on the old router that you want to use as a Wi-Fi extender.
3. Connect the router: Connect the old router to your existing router using an Ethernet cable.
4. Configure the router: Log into the old router’s configuration page and configure it as an access point or wireless extender.
5. Test the connection: Once the router is configured, test the connection to make sure it is working correctly.
See lessHow To Read On Off Switch?
To read an on/off switch, you will need to identify the types of switch terminals and understand how the switch works. Most on/off switches have two terminals, one for the power source and one for the load, or device receiving the power. When the switch is in the “on” position, power flows from theRead more
To read an on/off switch, you will need to identify the types of switch terminals and understand how the switch works. Most on/off switches have two terminals, one for the power source and one for the load, or device receiving the power. When the switch is in the “on” position, power flows from the power source to the load. When the switch is in the “off” position, the power is disconnected from the load.
See lessWhere Do You Enable Global Dns For a Oneops Environment?
Global DNS for a OneOps environment is enabled in the "DNS" section of the "Clouds" tab in the OneOps console.
Global DNS for a OneOps environment is enabled in the “DNS” section of the “Clouds” tab in the OneOps console.
See lessHow To Use Hotspot With Vpn?
1. Connect to the Hotspot network that you want to use with the VPN. 2. Install the VPN client software on your device. 3. Configure your VPN client with the settings provided by your VPN provider. 4. Connect to the VPN server. 5. Once connected, your device will be protected by the VPN and all of yRead more
1. Connect to the Hotspot network that you want to use with the VPN.
2. Install the VPN client software on your device.
3. Configure your VPN client with the settings provided by your VPN provider.
4. Connect to the VPN server.
5. Once connected, your device will be protected by the VPN and all of your internet traffic will be encrypted and sent through the secure VPN tunnel.
See lessHow To Make Lan Cable Longer?
To make a LAN cable longer, you can use a coupler (or a splitter) to join two cables together. To do this, you’ll need two cables of the same type (cat5e, cat6, etc) and a coupler. Start by cutting off the ends of both cables and exposing the colored wires. Then, twist the wires of the same color toRead more
To make a LAN cable longer, you can use a coupler (or a splitter) to join two cables together. To do this, you’ll need two cables of the same type (cat5e, cat6, etc) and a coupler. Start by cutting off the ends of both cables and exposing the colored wires. Then, twist the wires of the same color together and secure them in the coupler. Finally, attach the coupler onto the two cables and you’re done.
See less