Sign Up to our social questions and Answers Engine to ask questions, answer people’s questions, and connect with other people.
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
How To Use Telnet In Windows?
1. To open the Telnet client, open the Command Prompt by typing “cmd” in the search bar. 2. At the prompt, type “telnet” and press Enter. 3. To connect to a remote computer, type “open followed by the IP address or hostname of the computer you’re trying to connect to. For example, “open 192.168.1.1”Read more
1. To open the Telnet client, open the Command Prompt by typing “cmd” in the search bar.
2. At the prompt, type “telnet” and press Enter.
3. To connect to a remote computer, type “open followed by the IP address or hostname of the computer you’re trying to connect to. For example, “open 192.168.1.1”
4. You’ll then be prompted for a username and password. Enter the credentials for the remote computer.
5. Once authenticated, you’ll be presented with a prompt where you can enter Telnet commands.
6. To disconnect, type “quit” and press Enter.
See lessWhich Device Would Commonly Be Found In a Laptop?
Common devices found in a laptop include a CPU, RAM, hard drive, graphics card, display, keyboard, touchpad, and battery.
Common devices found in a laptop include a CPU, RAM, hard drive, graphics card, display, keyboard, touchpad, and battery.
See lessWake On Magic Packet When System?
Wake On Magic Packet is a networking standard that allows a computer to be woken up from a low power state by a network message. This is commonly used to wake up computers remotely for maintenance, or to access files or services on the computer. The computer needs to be configured to support WOL, anRead more
Wake On Magic Packet is a networking standard that allows a computer to be woken up from a low power state by a network message. This is commonly used to wake up computers remotely for maintenance, or to access files or services on the computer. The computer needs to be configured to support WOL, and the system needs to be connected to the network to receive the ‘magic packet’.
See lessWhere Is Pause Break On Dell Laptop?
The Pause Break key is typically located between the F12 and Print Screen keys on most Dell laptop keyboards.
The Pause Break key is typically located between the F12 and Print Screen keys on most Dell laptop keyboards.
See lessWhat Is The Meaning Of The 10 In 10baset?
10BASET stands for 10-Base T, which is a type of Ethernet technology that uses twisted pair cables to connect devices at a speed of 10 Mbps. It is the most commonly used Ethernet technology.
10BASET stands for 10-Base T, which is a type of Ethernet technology that uses twisted pair cables to connect devices at a speed of 10 Mbps. It is the most commonly used Ethernet technology.
See lessHow To Install Rabbitmq On Centos 7?
1. Update the system: sudo yum update 2. Install Erlang: sudo yum install epel-release sudo yum install erlang 3. Add the RabbitMQ repository to the system: sudo wget https://www.rabbitmq.com/rabbitmq-release-signing-key.asc sudo rpm --import rabbitmq-release-signing-key.asc sudo yum install https:/Read more
1. Update the system:
sudo yum update
2. Install Erlang:
sudo yum install epel-release
sudo yum install erlang
3. Add the RabbitMQ repository to the system:
sudo wget https://www.rabbitmq.com/rabbitmq-release-signing-key.asc
sudo rpm –import rabbitmq-release-signing-key.asc
sudo yum install https://www.rabbitmq.com/releases/rabbitmq-server/v3.7.7/rabbitmq-server-3.7.7-1.el7.noarch.rpm
4. Start RabbitMQ:
sudo systemctl start rabbitmq-server
5. Enable RabbitMQ so it starts on boot:
sudo systemctl enable rabbitmq-server
6. Add a user and set permissions:
sudo rabbitmqctl add_user <username> <password>
sudo rabbitmqctl set_user_tags <username> administrator
sudo rabbitmqctl set_permissions -p / <username> “.*” “.*” “.*”
See lessWhich Solution Would Help A College Alleviate?
The solution will depend on the specific problem the college is facing. However, some potential solutions include improving student engagement and retention, developing more effective student support services, investing in faculty development and training, creating better communication systems betweRead more
The solution will depend on the specific problem the college is facing. However, some potential solutions include improving student engagement and retention, developing more effective student support services, investing in faculty development and training, creating better communication systems between students, faculty and staff, investing in technology and digital resources, and creating more effective marketing and recruitment strategies.
See lessHow To Connect Two Computers With Usb?
1. Connect one end of a USB cable to the USB port of one of the computers. 2. Connect the other end of the USB cable to the USB port of the other computer. 3. On both computers, open the Control Panel. 4. In the Control Panel, select Network and Sharing Center. 5. In the Network and Sharing Center,Read more
1. Connect one end of a USB cable to the USB port of one of the computers.
2. Connect the other end of the USB cable to the USB port of the other computer.
3. On both computers, open the Control Panel.
4. In the Control Panel, select Network and Sharing Center.
5. In the Network and Sharing Center, select Set up a new connection or network.
6. In the Set up a Connection or Network window, select Set up a network.
7. Select the radio button for the USB connection type.
8. Follow the on-screen instructions to complete the connection.
9. On both computers, open the File Explorer.
10. In the File Explorer, select the Network icon to view the shared folders and files on each computer.
See lessHow To Remove Cpu Socket From Motherboard?
1. To remove the CPU socket from the motherboard, first turn off the computer and unplug the power supply. 2. Open the computer case and locate the CPU socket on the motherboard. 3. Carefully remove the CPU fan, heat sink, and other components from the top of the CPU socket. 4. Unscrew the four screRead more
1. To remove the CPU socket from the motherboard, first turn off the computer and unplug the power supply.
2. Open the computer case and locate the CPU socket on the motherboard.
3. Carefully remove the CPU fan, heat sink, and other components from the top of the CPU socket.
4. Unscrew the four screws that hold the CPU socket to the motherboard.
5. Gently slide the CPU socket off the motherboard and set it aside.
6. Ensure that all components have been removed from the socket and that the socket is clean before re-installing it.
See lessWhich Unit Of Measurement Is Used To Indicate The Hard Drive Speed ?
The standard unit of measurement used to indicate the hard drive speed is Rotations Per Minute (RPM).
The standard unit of measurement used to indicate the hard drive speed is Rotations Per Minute (RPM).
See less