Sign Up to our social questions and Answers Engine to ask questions, answer people’s questions, and connect with other people.
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
How To Get Internet From Router?
1. Connect the modem to the router. Using an Ethernet cable, connect the modem to the Internet port on the router. 2. Connect the router to the computer. Using an Ethernet cable, connect the router to the computer. 3. Power on the modem, router, and computer. 4. Configure the router. The configuratiRead more
1. Connect the modem to the router. Using an Ethernet cable, connect the modem to the Internet port on the router.
2. Connect the router to the computer. Using an Ethernet cable, connect the router to the computer.
3. Power on the modem, router, and computer.
4. Configure the router. The configuration process depends on the router model.
5. Connect to the network. On the computer, locate the network and connect to it.
See lessHow To Set Up Star Topology Network?
1. Gather the necessary hardware and software. You will need a switch, Ethernet cables, and a router. You will also need to install network management software on each node in the network. 2. Connect the switch to the router. Use an Ethernet cable to connect the router to the switch. 3. Connect allRead more
1. Gather the necessary hardware and software. You will need a switch, Ethernet cables, and a router. You will also need to install network management software on each node in the network.
2. Connect the switch to the router. Use an Ethernet cable to connect the router to the switch.
3. Connect all nodes to the switch. Use Ethernet cables to connect all nodes to the switch. Make sure that the cables are securely connected.
4. Configure the network settings. Use the network management software to configure the network settings such as IP addresses, subnet masks, and default gateways.
5. Test the network. Use the network management software to test the network to make sure it is functioning properly.
6. Monitor the network. Use the network management software to monitor the network to make sure it is functioning properly and to address any issues that may arise.
See lessEncryption Of Data Is The Function Of Which Osi Layer?
Encryption of data is the function of the Network Layer (Layer 3) of the OSI Model.
Encryption of data is the function of the Network Layer (Layer 3) of the OSI Model.
See lessWhich Of The Following Files Defines Linux Groups?
/etc/group
/etc/group
See lessHow To Set Up a Sagemcom Router?
1. Connect one end of an Ethernet cable to the port labeled “Internet” on the back of the Sagemcom router and the other end into the modem's Ethernet port. 2. Connect the power adapter to the router and plug it into an outlet. 3. Turn on the modem, then the router. 4. Wait for the router's lights toRead more
1. Connect one end of an Ethernet cable to the port labeled “Internet” on the back of the Sagemcom router and the other end into the modem’s Ethernet port.
2. Connect the power adapter to the router and plug it into an outlet.
3. Turn on the modem, then the router.
4. Wait for the router’s lights to turn solid green, indicating that the router is connected to the internet.
5. Open a web browser on your computer, and type 192.168.1.1 into the address bar.
6. Enter the username and password when prompted. The default username is usually “admin” and the default password is usually “password”.
7. Follow the on-screen instructions to complete the setup. This can include setting up a wireless network, changing the router’s password, and more.
See lessHow To Reboot Cisco Switch Command?
To reboot a Cisco switch, you can use the "reload" command. This command will prompt the user to save any existing configuration changes and then proceed with the reboot. The syntax is as follows: reload [<number>] [<time>] [<message>] Where: <number> is the number of minutesRead more
To reboot a Cisco switch, you can use the “reload” command. This command will prompt the user to save any existing configuration changes and then proceed with the reboot. The syntax is as follows:
reload [<number>] [<time>] [<message>]
Where:
<number> is the number of minutes until the reboot.
<time> is the time in 24-hour format (hh:mm) when the reboot will take place.
<message> is the message that will be displayed to users when the reboot is initiated.
See lessWhat Are The Two Categories Of Security Settings Within Group Policy? Select Two Answers.?
1. Security Options 2. Account Policies
1. Security Options
See less2. Account Policies
How To Have Multiple Ip Addresses?
1. Use a virtual private network (VPN) – A VPN is a service that allows you to create a secure connection to another network over the internet. You can use a VPN to access multiple devices or locations with different IP addresses. 2. Use a proxy server – A proxy server is another way to hide your IPRead more
1. Use a virtual private network (VPN) – A VPN is a service that allows you to create a secure connection to another network over the internet. You can use a VPN to access multiple devices or locations with different IP addresses.
2. Use a proxy server – A proxy server is another way to hide your IP address and access the internet using a different IP address.
3. Use multiple internet connections – If you have multiple internet connections, you can set up a network with each connection having its own IP address.
4. Use a dedicated IP address – A dedicated IP address is a unique IP address assigned to a single user or device. It can be used to access multiple locations with a single IP address.
See lessHow To Find The Username In Linux?
1. Check the /etc/passwd file. The /etc/passwd file contains a list of all the users on the system. Each line in the file contains a single user’s information, including their username. 2. Use the getent command. The getent command can be used to query the system databases (such as passwd, group, anRead more
1. Check the /etc/passwd file.
The /etc/passwd file contains a list of all the users on the system. Each line in the file contains a single user’s information, including their username.
2. Use the getent command.
The getent command can be used to query the system databases (such as passwd, group, and shadow). By running the command getent passwd you can get a list of all the users on the system, including their username.
3. Use the id command.
The id command can be used to get information about a specific user. If you know the user’s UID (User ID) or GID (Group ID), you can use the id command to get the user’s username.
4. Use the whoami command.
The whoami command will print the username of the user that is currently logged in.
See lessHow Do I Know What Kind Of Router I Have?
The easiest way to determine what kind of router you have is to look at the label on the bottom or side of the router. The label will usually specify the make and model of the router. Additionally, you can access the router's settings page by typing the router's IP address into a web browser. The seRead more
The easiest way to determine what kind of router you have is to look at the label on the bottom or side of the router. The label will usually specify the make and model of the router. Additionally, you can access the router’s settings page by typing the router’s IP address into a web browser. The settings page should also provide information about the make and model of the router.
See less