Sign Up to our social questions and Answers Engine to ask questions, answer people’s questions, and connect with other people.
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
How To Setup Unifi Security Gateway?
1. Connect the Unifi Security Gateway (USG) to your modem/router with an Ethernet cable. 2. Connect your computer to a LAN port on the USG using an Ethernet cable. 3. Launch a web browser and type in “https://192.168.1.1” into the address bar. 4. Enter the username and passwordRead more
1. Connect the Unifi Security Gateway (USG) to your modem/router with an Ethernet cable.
2. Connect your computer to a LAN port on the USG using an Ethernet cable.
3. Launch a web browser and type in “https://192.168.1.1” into the address bar.
4. Enter the username and password to log in. The default username and password are “ubnt” and “ubnt” respectively.
5. Go to “Settings” and then select “Networks”.
6. Select the WAN interface and configure it with your internet connection settings.
7. Go to “Settings” and then select “Routing & Firewall”.
8. Select “Firewall” and configure the settings according to your requirements.
9. Go to “Settings” and then select “Services”.
10. Select “DHCP Server” and configure the settings according to your requirements.
11. Finally, you can enable the Unifi Security Gateway by clicking on the “Enable” button in the “Action” column.
12. Save the settings and reboot the USG.
Your Unifi Security Gateway is now successfully setup and ready to be used.
See lessHow To Check Server Time Linux?
To check the server time on Linux, you can use the date command. To display the current date and time, just type: $ date To display the current time only, type: $ date +%T You can also use the timedatectl command to display the time and timezone information. To display the current timezone, tRead more
To check the server time on Linux, you can use the date command. To display the current date and time, just type:
$ date
To display the current time only, type:
$ date +%T
You can also use the timedatectl command to display the time and timezone information. To display the current timezone, type:
$ timedatectl
You can also manually set the timezone information by typing:
$ timedatectl set-timezone <timezone>
Replace <timezone> with your desired timezone.
See lessHow To Check Samba Password In Linux?
You can view the Samba password in Linux using the 'pdbedit' command. This command will show you all the Samba users and their corresponding passwords. It is also possible to view the passwords using the 'smbpasswd' command.
You can view the Samba password in Linux using the ‘pdbedit’ command. This command will show you all the Samba users and their corresponding passwords. It is also possible to view the passwords using the ‘smbpasswd’ command.
See lessWhat Is F5 Load Balancer?
F5 Load Balancer is a software-defined networking solution that provides automated traffic distribution and management capabilities across multiple servers and other networked resources. It enables organizations to quickly and easily deploy and manage applications across a distributed environment anRead more
F5 Load Balancer is a software-defined networking solution that provides automated traffic distribution and management capabilities across multiple servers and other networked resources. It enables organizations to quickly and easily deploy and manage applications across a distributed environment and maintain high availability, scalability, and performance. F5 Load Balancer also provides additional features such as health monitoring, SSL offloading, content switching, and global server load balancing.
See lessHow To Disable Root Account In Linux?
1. Log in to your Linux system as the root user. 2. Open a terminal window and type in the following command: passwd -l root 3. Press enter and your root account will be disabled. 4. To ensure that the root account has been successfully disabled, type in the following command: passwd -S rootRead more
1. Log in to your Linux system as the root user.
2. Open a terminal window and type in the following command: passwd -l root
3. Press enter and your root account will be disabled.
4. To ensure that the root account has been successfully disabled, type in the following command: passwd -S root
5. If the output of this command is ‘LK’, then the root account has been successfully disabled.
See lessWhat Is Chip Definition?
Chip, in computing, is a small, specialized electronic circuit or microprocessor that is designed to carry out a specific operation. It is usually embedded in a larger device to provide extra capabilities. These devices can range from microcontrollers and application-specific integrated circuits (ASRead more
Chip, in computing, is a small, specialized electronic circuit or microprocessor that is designed to carry out a specific operation. It is usually embedded in a larger device to provide extra capabilities. These devices can range from microcontrollers and application-specific integrated circuits (ASICs) to microprocessors and digital signal processors (DSPs).
See lessWhat Is Dhcp Client Id Mac?
The DHCP Client ID Mac is a unique identifier that is assigned to a computer or device on a network. It is used to identify the device when connecting to a DHCP server. It consists of the MAC address of the device, which is a unique 12-digit hexadecimal code that is assigned to each device.
The DHCP Client ID Mac is a unique identifier that is assigned to a computer or device on a network. It is used to identify the device when connecting to a DHCP server. It consists of the MAC address of the device, which is a unique 12-digit hexadecimal code that is assigned to each device.
See lessHow To Get Rid Of Radio Frequency Interference?
1. Move the antenna: Moving the antenna to a different spot in the room or even outside can reduce interference. 2. Use an active noise filter: An active noise filter can be used to reduce interference from other sources like power supplies. 3. Use ferrites: Ferrites are small pieces of materRead more
1. Move the antenna: Moving the antenna to a different spot in the room or even outside can reduce interference.
2. Use an active noise filter: An active noise filter can be used to reduce interference from other sources like power supplies.
3. Use ferrites: Ferrites are small pieces of material that can be attached to the antenna and other cables to reduce interference.
4. Use shielded cables: Using shielded cables for the antenna and other cables connected to the radio can also help reduce interference.
5. Increase the distance: Increasing the distance between the radio and any other sources of interference can also help reduce interference.
6. Change the frequency: Changing the frequency of the radio can also help reduce interference from other nearby sources.
See lessWhat Is Exfat File System?
ExFAT (Extended File Allocation Table) is a file system created by Microsoft and optimized for flash drives and other external storage devices. It was designed to replace the older FAT32 file system, which is limited to a maximum file size of 4GB. ExFAT is designed to provide better performance andRead more
ExFAT (Extended File Allocation Table) is a file system created by Microsoft and optimized for flash drives and other external storage devices. It was designed to replace the older FAT32 file system, which is limited to a maximum file size of 4GB. ExFAT is designed to provide better performance and support for larger files, such as videos and high-resolution photos. It also supports larger volumes and faster transfer speeds.
See lessHow To Enable All Macros In Excel?
1. Open the Excel file. 2. Click the Office button in the top left corner. 3. Select "Excel Options" at the bottom of the drop-down menu. 4. Select the "Trust Center" category. 5. Select "Trust Center Settings" at the bottom of the window. 6. Select the "Macro Settings" category. 7. Select "ERead more
1. Open the Excel file.
See less2. Click the Office button in the top left corner.
3. Select “Excel Options” at the bottom of the drop-down menu.
4. Select the “Trust Center” category.
5. Select “Trust Center Settings” at the bottom of the window.
6. Select the “Macro Settings” category.
7. Select “Enable all macros (not recommended, potentially dangerous code can run)” from the drop-down menu.
8. Click “OK” to save the setting.