A Switch Receives A Frame Addressed To The Mac Address

A Switch Receives A-Frame Addressed To The Mac Address

Today let us know how to build the Mac address. We already know that switch is like a device, this can be able to learn the Mac address of the devices and can able to map to the phone numbers that are present to the devices.

The switch port numbers will be very helpful in order to forward the frames to their destination address.

Now let us take an example in order to understand the concept of this switching.

Let say, we have two switches that are connected to the two devices. Device A is connected to switch 1 and device B is connected to switch 2.

 Let say, device A wants to send the data to the device B. So it sends the packet which consists of data into the network to which the devices are connected.

Now, switch 1 and switch 2 will look inside the frame and it is going to find the destination MAC address.

Now, this is where the entry is present in the switch ports, let see this device be is present on port four of this switch.

Now let us know the MAC address table and how the switch will build the Mac address table. This switch port consists of multiple addresses in it. Each switch has a different number of Mac addresses that are present in it. Here if you want to get device B, then we need to move to port 4 where the Mac address is present.

We all know that the network is like a collection of devices, these devices are nothing but service printers all these are connected to each other in a network. This can able to achieve by a device called a switch.

The main goal of this switch is in order to forward the packets to the destination address. And in order to forward these packets, this switch follows some of the techniques Like the MAC address table.

These switches will be able to receive the frames and then these frames can make their decision in order to forward the frames to some of the Other ports that are present on the internet.

These switches will use the destination MAC address in order to communicate directly through the switch to some other outbound port that is present.

In order to know where the court should send a frame to be sent. We should learn there are these devices are present on these ports. This is which can able to learn the relationship of the ports to the devices. For this, it can able to build a table which is called a mac-address-table.

This MAC address table is also called a content addressable memory table. 10 which uses this mac-address-table in order to forward the frames of packets between the two devices.

The Mac address table will be built by storing the Mac address of each device that is present on the network. Now this which uses this MAC address in order to send the frames to the specific device.

The easy way to remember the operating of this is called, 10 which can able to learn the source address and will forward the frames best of the destination address.

The switch can able to increase the Mac address table based on the source address that is present.

When a frame is entered into the switch then, it traps the source address of this frame and we’ll add the Mac address to the Mac table that is present on the network.

Now the switch will be able to examine the destination address that is found in the Mac table