An Inkjet Printer Output Is Streaked. What Would You Do?

An inkjet printer output is streaked. What would you do?

Sometimes the problem with the inject printer happened and the output has the ink spots in a random pattern on the page or streaked, then you don’t have to worry about it. There is a different solution to this problem. This post has the methods to resolve the problem of the inject printer output streaked.

The problem is due to the dirty and clogged print head. To solve this just switch off the printer and remove the plug, keep it for 15 minutes. And then plug the wire into the switch while you are going to turn on the printer. If the streak may occur again then check the ink inside the printer cartridge, and change it to the new one and check whether it solves the issue. The third solution is you need to clean the print heads to make the output clear. If still, the problem remains same after these efforts contact with the customer service or to the electric store.

What is the inject printer and its cause for streaks?

The inject printer works in a way that it put the ink drops from the print cartridge directly on the printed page. The printer uses the toner cartridges which are full of dry prodder which are printed on paper with the help of the laser and heat. But sometimes the inks clogged on the pages that ‘why the automated printer regularly clean the printer to make it good for work. The reason for the streaks may vary and some of them are discussed in the following:

Cartridge problem

Sometimes the problem (streaks) occurs due to the Cartridge in the inject printer. This may be due to the clogged cartridge nozzle which case the uneven distribution of the ink on the pages. If the printer using the cartridge then maybe, they have the printer “heads” in them, all you need to clean them if they are dirty. If the printer uses the ink cartridges it might be damaged in some way.

Printer problem:

Sometimes the ink might be leak into the printer parts such as the rollers, which need to be cleaned. Mostly this happens when the print streaks are on the outer side or the edges of the pages. The other situation is that the printer head might not be in the exact location and it needs to be straightened. The roller parts of the computer become damaged or in need of a clean or repair.

Tips to repair or clean

During the roller cleaning, use lint-free clothe.do not touch the roller because the oil might be stick on your hands a cause further problems. For the cleaning use lint-free, coffee filters, cotton balls in a pinch for better results. To remove the extra cartridge ink, dip the heads with distilled water or with the alcohol rub it, and with the paper towel dry the area. If the printer has the auto self-cleaning try to run it and then print again.