Before Replacing An Image Drum, What Should You Do First?

Before Replacing An Image Drum, What Should You Do First?

Firstly, we need to unplug the printer in order to make it cool down, and then we should send the test pages and try to test them before replacing the image drum. And at last, empty the paper tray and try to reset the printer to the factory defaults. Now, let us learn briefly about the replacement of the image drum and how to fix that.

For example, let say HP laser jet printers, the printer control panel, and the printer software prompts the messages like imaging drum is very low, the print quality is then no longer acceptable. Then we consider installing a replacement drum by using some of the steps.

Now, let us discuss these steps in detail. Firstly we should lift the scanner assembly and then we should lift the cover then is at the top. Now put the middle handle of the imaging drum and then we should pull it along the track with the help of the toner cartridge.

After we remove the imaging drum and the toner cartridge from the protective bag, this olf imaging drum and the toner cartridge must be disposed of for its recycling.

We should align it with the tracks by holding the middle handle of the imaging drum to the inside printer and we should push it down until the drum clicks into the place.

Now close the top cover and we should lower the scanner assembly.

Now, let us learn how to replace the imaging drum with the Hp laserJet printers. The printer software will get to promote the messages. Let us know the following messages in detail. The Imaging drum can be low or it can also be very low. The print quality should be no longer acceptable.

We can consider installing the replacement drum by using some of the steps. Now, let us discuss these steps in detail. Firstly, we should lift the scanner assembly, and then we should lift the top cover and make sure it is firmly placed. Now try to hold the middle hand of the toner cartridge and we should pull it along with all the tracks which are temporary can remove it. And then we should hold the middle hand of the imaging drum and then we should pull it along with the tracks in order to remove it. We should remove the new imaging drum from the protective bags.

We should dispose of the used imaging drum for recycling, and then we should hold the middle handle of the imaging drum and we should align the drum with the tracks in order to fit into the printer. And we should slide the drum back into the bottom until unless it clicks into the place.

And then we should hole the middle handle of the toner cartridge and should align it with the tracks that are inside the printer. And we should slide it back into the bottom until it perfectly fits in place. At least we should close the top cover and then we should lower the assembly.