How To Configure Point To Point Connection?
Share
Sign Up to our social questions and Answers Engine to ask questions, answer people’s questions, and connect with other people.
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
1. Start by connecting the two devices using either a direct cable connection or an existing router, switch, or hub.
2. Configure the IP addresses of both machines. This can be done manually or by using DHCP to assign each machine a unique IP address.
3. Configure the gateway address on the local machine to be the IP address of the remote machine.
4. Enable connection sharing on both machines. This will allow them to communicate with one another.
5. Test the connection by pinging the remote IP address from the local machine. If the ping is successful, then the point–to–point connection is up and running.
1. Gather the necessary information for both sides of the connection including network addresses, subnet masks, and other relevant protocols.
2. Install the necessary hardware and software components on both sides of the connection.
3. Configure each side of the connection with the appropriate network settings. In particular, configure the IP address, subnet mask, and gateway on each side.
4. Test the connection by pinging each side of the connection from the other side.
5. Once tested, set up a point-to-point tunnel (for example, PPTP or OpenVPN) if extra security or encryption is desired.
6. Set up a firewall on each side of the connection to limit access and control traffic.
7. If necessary, enable port forwarding or dynamic DNS for the connection.