How To Configure Tp Link Wireless Router With Cable Internet?

How to configure TP-link wireless router with cable internet
Let us learn how to configure the local cable internet with the tp-link. TDW 896 is a modem plus router device. Connecting local internet cable with the device is not known by many people. These local cable T share the internet, so we need to configure the rj45 cable in the router. The modem plus router consists of all the features, where it can use this in only out.

Let us discuss how to configure with our cable. Firstly we need to take the backup previous settings in our computer i.e Mac address, IP address subnet gateway, domain name servers. We should make sure to copy all these necessary things. We just need to type 192.168.0.1 or 192.168.1.1.

After storing the necessary details, there are four ports present at the backside of the modem router, these are Lan ports i.e Lan 1, Lan 2, Lan 3, Lan 4. If the modem router consists of any port, these can be called the van port. Here we can connect the rj45. This rj45 is the cable of the service provider. We connect this rj45 in the Lan 4 which we also can call the van port. And the second cable which is coming from the computer can connect to the remaining three ports.

After connecting these cables, we need to go to the browser and type 192.168.1.1, and press enter. Now we can see a screen like a login page or if you do not see anything on the screen press the reset button on the modem router.

Now, type admin and the password. Here the password is also an admin at default unless the user makes any changes. After login into it, we can see a page that consists of device info, quick setup, operation mode, advanced settings, wireless, guest network, USB settings, diagnostic, management, log out at the left side of the page.

Press the next button that is present at the center of the page, select the wireless router mode, and press next. Here we have to fill in the details that we have saved earlier from the previous router settings. We should make sure to type or copy each and every detail correctly. Press next, after pasting all the information.

Here enable Enable Wireless checkbox and given the name of your Network name along with the network authentication, password that you want to put on your wireless network.

After completing the process, click Next. we can see all the details that we have entered and press confirms button. After confirming we can see the status of the device at the device info. We can see Up or Down at the status of the device. Now, the most important part is, if we can able to open any sites it is ok. But, if we are not able to open any of the sites we need to contact the service provider. The service providers will refresh the MAC address in the system.