How To Connect Switch To Pc?
Share
Sign Up to our social questions and Answers Engine to ask questions, answer people’s questions, and connect with other people.
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
1. Connect an Ethernet cable from the switch to your computer.
2. Open the Network and Sharing Center on your PC.
3. Click Change adapter settings.
4. Right–click on Local Area Connection and select Properties.
5. Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
6. Select Obtain an IP address automatically.
7. Select Use the following DNS server addresses.
8. Enter your DNS server settings or select “Automatic” if available.
9. Click OK.
10. Restart your computer, then test your internet connection.
1. Connect one end of an Ethernet cable to a LAN port on the back of the switch, and the other end to an Ethernet port on the back of your computer.
2. Connect the power cord to the power port on the back of the switch, then plug the other end into a wall outlet or power strip.
3. Turn on the power switch on the back of the switch.
4. On your computer, open the Control Panel and go to Network and Internet > Network Connections.
5. Find the Ethernet connection and right-click on it. Select Properties, then click the Networking tab.
6. Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
7. In the IP address box, type in the IP address for the switch (e.g. 192.168.1.1) and the subnet mask (e.g. 255.255.255.0). Click OK to save the settings.
8. On your computer, open a web browser and type in the IP address for the switch (e.g. 192.168.1.1). This should open the web-based configuration page for the switch.
9. Enter the username and password for the switch (if required) and configure the settings as needed.
10. When you are done, click the Save button to save the settings. The switch is now connected to your computer.