How To Copy Config To Cisco Switch?
Share
Sign Up to our social questions and Answers Engine to ask questions, answer people’s questions, and connect with other people.
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
1. log into the switch using a console or terminal connection.
2. Enter ‘enable’ mode and enter in your enable password.
3. Enter ‘copy running-config startup-config’ to save the current configuration on the switch. This command will save the running configuration on the switch to the startup configuration.
4. If you need to copy the configuration to another switch, you can use the ‘copy startup-config tftp’ command to copy the startup configuration to a TFTP server. You will need to specify the IP address of the TFTP server and the filename you wish to save the file as.
5. Use the ‘copy tftp startup-config’ command on the destination switch to copy the saved configuration file to the new switch. You will need to specify the IP address of the TFTP server, the filename, and the destination filename.
1. Connect to the switch via the console port using a terminal emulator program like HyperTerminal or PuTTY.
2. Log in to privileged EXEC mode by entering the enable command at the prompt.
3. Enter the copy command. The syntax for the copy command is: Copy source–file destination–file
4. Specify the source and destination pathnames for the copy command. For example, if you wanted to upload a configuration file named config.txt from your local PC to the switch, enter the command: copy flash:/config.txt system:running–config
5. Verify that the configuration has copied successfully. You can enter the show running–config command at the prompt to view the config file that has been uploaded.