Sign Up to our social questions and Answers Engine to ask questions, answer people’s questions, and connect with other people.
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
How To Set Up An Ethernet Cable?
1. Gather the necessary materials – The only materials you will need are an Ethernet cable and two network devices. The network devices can be a router, hub, switch, or other device with an Ethernet port. 2. Connect one end of the Ethernet cable to the first network device – Plug one end of the EtheRead more
1. Gather the necessary materials – The only materials you will need are an Ethernet cable and two network devices. The network devices can be a router, hub, switch, or other device with an Ethernet port.
2. Connect one end of the Ethernet cable to the first network device – Plug one end of the Ethernet cable into the Ethernet port on the first network device. The Ethernet port looks like a wide telephone jack.
3. Connect the other end of the Ethernet cable to the second network device – Plug the second end of the Ethernet cable into the Ethernet port on the second network device.
4. Test the connection – Once both ends of the Ethernet cable are connected to the respective network devices, test the connection by attempting to access the Internet from the device connected to the second network device. If the connection is established, you should be able to access the Internet.
See lessHow To Configure Cisco Catalyst 2960 Switch Step By Step?
1. Connect your Cisco Catalyst 2960 switch to your computer using an Ethernet cable. 2. Start up a terminal program (e.g. HyperTerminal, PuTTY, etc) and connect it to the switch’s console port using the serial cable provided. 3. Enter enable mode by typing “enable” at the prompt. 4. Enter configuratRead more
1. Connect your Cisco Catalyst 2960 switch to your computer using an Ethernet cable.
2. Start up a terminal program (e.g. HyperTerminal, PuTTY, etc) and connect it to the switch’s console port using the serial cable provided.
3. Enter enable mode by typing “enable” at the prompt.
4. Enter configuration mode by typing “config t” at the prompt.
5. Set the hostname of the switch by typing “hostname name” where “name” is the desired hostname for your switch.
6. Create a banner for your switch by typing “banner motd #message#” where “message” is the text string you want to display when users log into the switch.
7. Set the switch’s password–level security so that unauthorized users cannot make changes to the switch configuration by typing “password level 15 secret ”.
8. Create a VLAN name and number for your switch by typing “vlan #vlan_number# name vlan_name”.
9. Configure the switch interfaces. This can be done by typing “interface type slot/port” followed by “switchport mode access” and “switchport access vlan #vlan_number#” for each interface.
10. Save your switch configuration by typing “copy running–config startup–config”.
11. Exit configuration mode by typing “exit” at the prompt.
12. Disconnect from the switch by typing “exit” at the prompt.
See lessHow Many Linux Distributions Are There?
There is no definitive answer as to how many Linux distributions exist, as new versions are continually released and existing ones are modified. As of June 2020, DistroWatch reported that there were more than 250 active distributions available.
There is no definitive answer as to how many Linux distributions exist, as new versions are continually released and existing ones are modified. As of June 2020, DistroWatch reported that there were more than 250 active distributions available.
See lessWhich Two Of The Following Statements Are True Regarding Firewalls?
1. Firewalls can provide protection from malicious web traffic. 2. Most firewalls are implemented in software.
1. Firewalls can provide protection from malicious web traffic.
2. Most firewalls are implemented in software.
See lessWhat Protocol Sends Email To a Mail Server?
The Simple Mail Transport Protocol (SMTP) is used to send emails from an email client to a mail server.
The Simple Mail Transport Protocol (SMTP) is used to send emails from an email client to a mail server.
See lessHow To Find Mac Address On Cisco Router?
1. Log in to your Cisco router. 2. In the command-line interface (CLI), type "show mac-address-table" and press Enter. 3. Read through the list of MAC addresses that appears. You will see a list of each device connected to your router and its corresponding MAC address.
1. Log in to your Cisco router.
2. In the command–line interface (CLI), type “show mac–address–table“ and press Enter.
3. Read through the list of MAC addresses that appears. You will see a list of each device connected to your router and its corresponding MAC address.
See lessWhich Event Will Trigger The Sending Of Link-State Packets To Neighbor Routers ?
A link-state packet is sent whenever a router detects a change in the network topology. This could be triggered when a router is added, removed, or experiences a failure, when a new link is activated, or when an existing link fails or goes offline.
A link–state packet is sent whenever a router detects a change in the network topology. This could be triggered when a router is added, removed, or experiences a failure, when a new link is activated, or when an existing link fails or goes offline.
See lessHow Many Octets In An Ip Address?
An IP address consists of 32 bits or 4 octets.
An IP address consists of 32 bits or 4 octets.
See lessHow To Get On My Router?
1. Connect your computer to your router's network by using an Ethernet cable, or by connecting to its Wi-Fi network. 2. On your computer, open an internet browser and type in the IP address of your router into the address bar. This should be something like 192.168.0.1. 3. When the router login pageRead more
1. Connect your computer to your router‘s network by using an Ethernet cable, or by connecting to its Wi–Fi network.
2. On your computer, open an internet browser and type in the IP address of your router into the address bar. This should be something like 192.168.0.1.
3. When the router login page appears, enter your username and password (which you can find on the sticker on the back of your router).
4. Once you have successfully logged into the router, you should now be able to configure and manage it.
See lessHow To Change Firewall Profile In Windows 10?
1. Open the Control Panel and select System and Security. 2. Select Windows Firewall and then choose Advanced Settings. 3. In the Windows Firewall window, select the link at the left that says “Allow a program through Windows Firewall.” 4. Click the “Change settings” button at the top of the list. 5Read more
1. Open the Control Panel and select System and Security.
2. Select Windows Firewall and then choose Advanced Settings.
3. In the Windows Firewall window, select the link at the left that says “Allow a program through Windows Firewall.”
4. Click the “Change settings” button at the top of the list. 5. In the “Profile” section, choose the profile you want to use.
6. You can choose from Public, Private, or Domain, depending on the type of network you are connected to.
7. Click “OK” to save your changes.
See less