Sign Up to our social questions and Answers Engine to ask questions, answer people’s questions, and connect with other people.
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
How To Set Snmp Community String On Cisco Switch?
To set the SNMP community string on a Cisco switch, first login to the switch with your username and password. Once logged in, type in the command “snmp-server community” followed by an alphanumeric string. This string is the desired community name as your switch will use it to identify any SNMP reqRead more
To set the SNMP community string on a Cisco switch, first login to the switch with your username and password.
Once logged in, type in the command “snmp–server community” followed by an alphanumeric string. This string is the desired community name as your switch will use it to identify any SNMP requests coming from an authorized device.
For example, you could use the command “snmp–server community mycommstring”.
Once the community string is set, the switch will remember it until you change it.
You can also configure access rights in the command line if you wish more fine–grained control over what devices can access the switch with SNMP.
See lessHow To Tell If It’s a Phishing Email?
1. Look out for misspellings, bad grammar, and strange phrasing. 2. Check if the email contains an offer that sounds too good to be true. 3. See if the sender address looks unfamiliar. 4. Be suspicious of any emails asking for personal information (e.g. account details, passwords or credit card numbRead more
1. Look out for misspellings, bad grammar, and strange phrasing.
2. Check if the email contains an offer that sounds too good to be true.
3. See if the sender address looks unfamiliar.
4. Be suspicious of any emails asking for personal information (e.g. account details, passwords or credit card numbers).
5. Don’t click on any links or attachments from unknown senders.
6. Don’t respond to unexpected messages – even if they appear to be from someone you know.
7. Look out for suspicious looking URLs – some phishing emails contain links to websites that look legitimate but are actually fraudulent.
See lessHow To Fix Ssl Self-Signed Certificate Vulnerability?
1. Install a valid SSL/TLS certificate from a trusted and reputable Certificate Authority (CA): The easiest and most effective way to fix this vulnerability is to get an SSL/TLS certificate from a reputable CA. This will replace the self-signed certificate and provide the encryption and authenticatiRead more
1. Install a valid SSL/TLS certificate from a trusted and reputable Certificate Authority (CA): The easiest and most effective way to fix this vulnerability is to get an SSL/TLS certificate from a reputable CA. This will replace the self–signed certificate and provide the encryption and authentication that this type of certificate is designed for.
2. Use a certificate management tool: There are a number of certificate management tools available which make it easier to manage your certificates centrally, so you can ensure they’re always up to date and secure.
3. Implement Certificate Transparency (CT): CT is a project developed by Google which allows certificate authorities to publish all new certificates they issue in a public log. This allows anyone to verify whether the certificate is valid or not.
4. Monitor your certificates regularly: Finally, make sure that you monitor your certificates on a regular basis. Look out for any changes to the certificate details, such as expiration dates and the website domain name. If anything changes, investigate immediately as this could be a sign of malicious activity.
See lessWhich Command Displays Information From Smbios ?
The command to display information from SMBIOS is "dmidecode".
The command to display information from SMBIOS is “dmidecode“.
See lessHow To Configure Trunking On Cisco Switch?
1. Log into the Cisco switch using a console or SSH connection. 2. Enter the global configuration mode using the command "configure terminal". 3. Create a trunk port by entering the interface command followed by the desired interface. interface <port-name> 4. Set the port to trunk mode by enteRead more
1. Log into the Cisco switch using a console or SSH connection.
2. Enter the global configuration mode using the command “configure terminal“.
3. Create a trunk port by entering the interface command followed by the desired interface.
interface <port–name>
4. Set the port to trunk mode by entering the following command: switchport mode trunk
5. Determine and set the trunking encapsulation type by entering the following command: switchport trunk encapsulation {dot1q | isl}
6. Specify the VLANs that should be allowed on the trunk port by entering the following commands: switchport trunk allowed vlan {add | all | except | remove} <vlan list>
7. Enable 802.1Q trunking on the port by entering the following command: switchport nonegotiate
8. Verify the configuration by entering the show interfaces <port–name> switchport command.
9. Save the configuration by entering the copy running–config startup–config command.
See lessWhat Is a Characteristic Of An Ipv4 Loopback Interface On a Cisco Ios Router??
A characteristic of an IPv4 loopback interface on a Cisco IOS router is that the router can use it as its own address. All traffic destined for this address will be routed back to the router itself, allowing it to use the same address for multiple purposes like testing network connectivity or providRead more
A characteristic of an IPv4 loopback interface on a Cisco IOS router is that the router can use it as its own address. All traffic destined for this address will be routed back to the router itself, allowing it to use the same address for multiple purposes like testing network connectivity or providing a default route. Additionally, the loopback interface does not require any physical link or connection and can exist logically even if no network interfaces are enabled.
See lessHow To Prevent Mac Flapping In Cisco Switch?
1. Configure portfast on all access ports connected to host MACs: PortFast lets a switch port transition immediately from the blocking/listening state to forwarding state as soon as it goes up. 2. Decrease the value of the PortFast BPDU guard timer: A portfast bpdu guard timer can be set to 0 to preRead more
1. Configure portfast on all access ports connected to host MACs: PortFast lets a switch port transition immediately from the blocking/listening state to forwarding state as soon as it goes up.
2. Decrease the value of the PortFast BPDU guard timer: A portfast bpdu guard timer can be set to 0 to prevent any BPDU from entering the port and to stop the flapping.
3. Reduce the STP bridge max age timer: Reducing the STP bridge max age timer decreases the amount of time it takes for a switch to detect a topology change, which in turn reduces the amount of flapping caused by misconfigurations.
4. Configure loop guard: Loop guard is used to detect if a port has been inappropriately configured with spanning tree, and will block the port if a loop is found. This helps prevent mac flapping caused by misconfigurations.
5. Enable BPDU filter: Enabling BPDU filter on a port prevents the transmission of BPDUs, therefore preventing the port from participating in the STP process. This helps prevent mac flapping caused by misconfigurations.
See lessHow Long Do Router Bits Last?
The lifespan of router bits depends on the type and quality of the bit, as well as how it is used. Generally, good-quality solid carbide router bits can last up to hundreds of hours of use before needing to be sharpened or replaced.
The lifespan of router bits depends on the type and quality of the bit, as well as how it is used. Generally, good–quality solid carbide router bits can last up to hundreds of hours of use before needing to be sharpened or replaced.
See lessHow To Tell If Someone Has Hacked Your Email?
1. Unexpected emails in the Sent folder: Check your Sent folder for any emails that looks suspicious, that you did not send. 2. Unusual log-in activities: Look for unusual activity on the “last account activity” page. Here, you can check when and from where your email was accessed. 3. Password resetRead more
1. Unexpected emails in the Sent folder: Check your Sent folder for any emails that looks suspicious, that you did not send.
2. Unusual log–in activities: Look for unusual activity on the “last account activity” page. Here, you can check when and from where your email was accessed.
3. Password reset attempts: If there has been an attempted reset of your password or recovery information, this may be a sign your account was hacked.
4. Missing contacts: Check for missing contacts or those with incorrect email addresses. This could indicate a hacker has used your account to send out spam emails.
5. Spam emails: Pay attention to any spam emails sent from your account.
6. Account lockout: If you’ve been locked out of your account, this may be evidence that someone has hacked it.
See lessWhat Does The Wps Button Do On a Modem?
The WPS (WiFi Protected Setup) button on a modem is used to allow for easy connection to a wireless router. When the WPS button is pressed, the device being connected is given access to the local Wi-Fi network.
The WPS (WiFi Protected Setup) button on a modem is used to allow for easy connection to a wireless router. When the WPS button is pressed, the device being connected is given access to the local Wi–Fi network.
See less