Sign Up to our social questions and Answers Engine to ask questions, answer people’s questions, and connect with other people.
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
How To Reset Cisco Catalyst 2960 Switch?
1) Connect to your switch via the console port. 2) Once connected to the Cisco switch, log in with the username of “admin” and no password. 3) Reset the switch to the factory defaults by entering the command: “erase start” and press “enter”. 4) After the switch has finished resetting itself, re-enteRead more
1) Connect to your switch via the console port.
2) Once connected to the Cisco switch, log in with the username of “admin” and no password.
3) Reset the switch to the factory defaults by entering the command: “erase start” and press “enter”.
4) After the switch has finished resetting itself, re–enter the command “reload” and press “enter”.
5) At this point the switch will ask you to save the running configuration, type “no” and click “Enter”.
6) The switch will then ask to confirm the reload, type “yes” and press “enter”.
7) After the reload is complete you will be able to log into the switch using the default username and password of “cisco/cisco”.
See lessWhich Type Of Port Transfers Data Using Light Waves??
Optical fiber ports transfer data using light waves.
Optical fiber ports transfer data using light waves.
See lessHow To Turn Dhcp On Router?
1) Log in to your router's administrative console. 2) Find the DHCP settings page and navigate to it. 3) Enable the DHCP service and configure your desired setting options. 4) Save the changes and restart your router.
1) Log in to your router‘s administrative console.
2) Find the DHCP settings page and navigate to it.
3) Enable the DHCP service and configure your desired setting options.
4) Save the changes and restart your router.
See lessHow To Reset a Switch To Factory Settings?
1. Connect a console cable to the switch and a laptop or PC. 2. Log into the switch by opening the terminal software on the laptop/PC and typing: enable, enter and then entering the switch password (default is blank). 3. Type show running-config and make a backup of your configuration if needed. 4.Read more
1. Connect a console cable to the switch and a laptop or PC.
2. Log into the switch by opening the terminal software on the laptop/PC and typing: enable, enter and then entering the switch password (default is blank).
3. Type show running–config and make a backup of your configuration if needed.
4. Type write erase to erase the existing configuration.
5. Type reload and then press Enter.
6. When prompted to save the configuration type no.
7. After the reload, press Enter at the system configuration dialog.
8. Type yes and press Enter to save the configuration, and then answer No when prompted to start the configuration dialog.
9. All settings will be reverted to their factory defaults.
See lessHow To Find Ip Address Of Nas?
You can find the IP address of a NAS device (Network Attached Storage) using your router's administrative console. Log into the console and look for a list of connected devices. The NAS device should show up with its IP address. Additionally, you may be able to execute commands from within the NAS iRead more
You can find the IP address of a NAS device (Network Attached Storage) using your router‘s administrative console. Log into the console and look for a list of connected devices. The NAS device should show up with its IP address. Additionally, you may be able to execute commands from within the NAS itself to view its own IP address.
See lessWhich Raid Level Stripes Data Across Multiple?
RAID 0 (or "striping") is a technique that stripes data across multiple disks, but does not provide any data redundancy.
RAID 0 (or “striping“) is a technique that stripes data across multiple disks, but does not provide any data redundancy.
See lessHow To Open Port In Linux Permanently?
1. Log into your server using SSH as the root user. 2. Check for existing firewall rules using the following command: iptables -L 3. If you need to open a specific port, use the following command: iptables -A INPUT -p tcp --dport <portnumber> --syn -j ACCEPT Replace <portnumber> with theRead more
1. Log into your server using SSH as the root user.
2. Check for existing firewall rules using the following command:
iptables –L
3. If you need to open a specific port, use the following command:
iptables –A INPUT –p tcp —dport <portnumber> —syn –j ACCEPT
Replace <portnumber> with the actual port number.
4. Save your changes with the following command: iptables–save > /etc/sysconfig/iptables
5. Test the new configuration with the following command: iptables –L The <portnumber> should now appear in the list.
See lessHow Do I Open My Router Settings?
The process for opening router settings depends on the type of router you have. Generally, it involves using an internet browser to enter the IP address of your router. Depending on the model and manufacturer of your router, the default IP address may be listed in the user manual. If not, you can usRead more
The process for opening router settings depends on the type of router you have. Generally, it involves using an internet browser to enter the IP address of your router. Depending on the model and manufacturer of your router, the default IP address may be listed in the user manual. If not, you can usually find it by searching online for the specific make and model of your router. Once you‘ve entered the IP address into your internet browser window, you should be able to access the router settings.
See lessHow To Setup a Vlan On a Switch?
1. Log into the switch and enter the Configuration Mode. 2. Create a new VLAN by using the ‘vlan’ command. Assign a unique number and name to each VLAN 3. Assign ports to the VLAN by using the ‘switchport access’ command 4. Enable the VLAN on the switch with the ‘vlan up’ or ‘enable’ command 5. SaveRead more
1. Log into the switch and enter the Configuration Mode.
2. Create a new VLAN by using the ‘vlan’ command. Assign a unique number and name to each VLAN
3. Assign ports to the VLAN by using the ‘switchport access’ command
4. Enable the VLAN on the switch with the ‘vlan up’ or ‘enable’ command
5. Save the configuration with the ‘write memory’ command
See lessHow To Program a Cisco Remote?
1. Connect the Cisco remote to the computer using a USB cable. 2. Download and install the appropriate Cisco Remote Software on the computer. 3. Open the Cisco Remote Software, and click on the “Connect” button in the top left corner to launch the connection process. 4. Select the appropriate serialRead more
1. Connect the Cisco remote to the computer using a USB cable.
2. Download and install the appropriate Cisco Remote Software on the computer.
3. Open the Cisco Remote Software, and click on the “Connect” button in the top left corner to launch the connection process.
4. Select the appropriate serial port and click the “Next” button.
5. Follow the instructions on the screen to configure the Cisco remote.
6. Click the “Finish” button when you’re done.
7. Test the Cisco remote by pressing the buttons or using the menu options.
See less