Sign Up to our social questions and Answers Engine to ask questions, answer people’s questions, and connect with other people.
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
How To Find Ip Address With Mac Address Command?
The IP address can be obtained from the Mac address using the “arp” command in the Terminal. The syntax is: arp -a <target_mac_address>. Replace <target_mac_address> with the Mac address of the device you are attempting to retrieve the IP address for.
The IP address can be obtained from the Mac address using the “arp” command in the Terminal. The syntax is: arp –a <target_mac_address>. Replace <target_mac_address> with the Mac address of the device you are attempting to retrieve the IP address for.
See lessHow To Configure Router On a Stick?
1. Connect your computer to the router with an Ethernet cable. 2. Configure the router to assign IP addresses to the computers connected to it. 3. Set up one port as a trunk port for connecting the switch to the router. 4. Connect an Ethernet cable from the trunk port on the router to the switch. 5.Read more
1. Connect your computer to the router with an Ethernet cable.
2. Configure the router to assign IP addresses to the computers connected to it.
3. Set up one port as a trunk port for connecting the switch to the router.
4. Connect an Ethernet cable from the trunk port on the router to the switch.
5. Create multiple VLANs on the switch and assign them to different ports.
6. Configure the router to route traffic between the various VLANs.
7. Configure the router to enable communication between the VLANs.
8. Test that the configuration is working as expected by pinging hosts in different VLANs.
See lessHow To Get Port Of Ip Address?
To get the port of an IP address, you can use a program like Network Utility. This program allows you to enter in an IP address and it will display any open ports associated with that address.
To get the port of an IP address, you can use a program like Network Utility. This program allows you to enter in an IP address and it will display any open ports associated with that address.
See lessHow Many Wires In a Ethernet Cable?
A typical Ethernet cable consists of four unshielded twisted pairs of copper wires, with an overall braided copper shield covering all eight wires.
A typical Ethernet cable consists of four unshielded twisted pairs of copper wires, with an overall braided copper shield covering all eight wires.
See lessHow To Add Dns Entry In Windows Server 2012?
1. Log in to the Windows Server 2012 computer as an administrator. 2. Click "Start," then "Administrative Tools" and then "DNS." 3. Double-click on the server name at the top of the DNS Manager console tree. 4. Select "Forward Lookup Zones" from the console tree. 5. Right-click on the domain name toRead more
1. Log in to the Windows Server 2012 computer as an administrator.
2. Click “Start,” then “Administrative Tools“ and then “DNS.”
3. Double–click on the server name at the top of the DNS Manager console tree.
4. Select “Forward Lookup Zones“ from the console tree.
5. Right–click on the domain name to which you wish to add the DNS entry, then select “New Host (A or AAAA).”
6. Enter the new FQDN into the “Name“ field, then enter the IP address into the “IP address“ field.
7. Click “Add Host“ to save the new entry.
See lessHow To Block a Mac Address From Your Network?
To block a Mac address from your network, you need to access the router's administrative console. From there, you can use the GUI interface or the command line to add the Mac address to the list of allowed or blocked devices. Once the Mac address is added, the device will no longer have access to thRead more
To block a Mac address from your network, you need to access the router‘s administrative console. From there, you can use the GUI interface or the command line to add the Mac address to the list of allowed or blocked devices. Once the Mac address is added, the device will no longer have access to the network.
See lessHow To Ftp To a Server In Linux?
1. Open a terminal window and type in the following command: ftp <hostname> 2. Enter your username and press enter. 3. Enter your password and press enter. 4. Once connected to the server, you can use the following commands to transfer files: put: uploads files to the server get: downloads filRead more
1. Open a terminal window and type in the following command: ftp <hostname>
2. Enter your username and press enter.
3. Enter your password and press enter.
4. Once connected to the server, you can use the following commands to transfer files:
put: uploads files to the server
get: downloads files from the server
ls: lists the files on the server
cd: change directories on the server
rm: removes files from the server
5. To disconnect from the server, type quit.
See lessWhat Modem Router Do I Need?
The type of modem router you need depends on the type of Internet connection you currently have. If you are using a cable or DSL modem, you will need a device with a built-in router. If you are using a fiber connection, you may need an optical network terminal (ONT) and a router. For a wireless connRead more
The type of modem router you need depends on the type of Internet connection you currently have. If you are using a cable or DSL modem, you will need a device with a built–in router. If you are using a fiber connection, you may need an optical network terminal (ONT) and a router. For a wireless connection, you would need a wireless modem/router combination device. Make sure to check the specification of your current Internet connection before shopping for a modem/router device.
See lessWhy Do I Keep Getting Data Breaches?
Data breaches can occur for a wide variety of reasons, ranging from malicious actors deliberately targeting your systems to an oversight in security measures. It is important to ensure that you have secure systems and processes in place to protect your sensitive data, including strong passwords andRead more
Data breaches can occur for a wide variety of reasons, ranging from malicious actors deliberately targeting your systems to an oversight in security measures. It is important to ensure that you have secure systems and processes in place to protect your sensitive data, including strong passwords and two–factor authentication, regularly patching software, encrypting data, and limiting access to critical information. Additionally, you should consider investing in cyber security training for your staff and implementing a data loss prevention protocol. Lastly, if your business deals with large amounts of customer data, it would be wise to enlist the help of a third–party security consultant to monitor and audit your system.
See lessHow To Copy And Paste In Linux Vi Editor?
1. Open the file in the vi editor using the vi command followed by the file name: $ vi filename 2. Enter into command mode by pressing the Esc key. 3. Move the cursor to the starting line of text that you want to copy. 4. Press Shift+v to enter into visual line mode. 5. Using the up and down arrow kRead more
1. Open the file in the vi editor using the vi command followed by the file name: $ vi filename
2. Enter into command mode by pressing the Esc key.
3. Move the cursor to the starting line of text that you want to copy.
4. Press Shift+v to enter into visual line mode.
5. Using the up and down arrow keys, select the lines of text that you want to copy.
6. Press y to copy the text.
7. Move the cursor to the location where you want to paste the copied text.
8. Press p to paste the copied text.
See less