What Is A Characteristic Of A Default Static Route?

What is a characteristic of a default static route?​

• Default static route uses the single network address which on one destination sends the multiple static routes.
• The route which is discovered by the dynamic protocol is backup by default static route.
• The gateway of the IP address is identified by the default static path on which the router sends the IP address for those who have no learned or static path.
• The original dynamic protocol is configured along with a high administrative distance.

Answer: A predefined static path corresponds to almost all IP packets. The gateway of the IP address is identified by the default static route to which the router sends the IP address for those who do not have a learned or static route. The default route is a route with 0.0.0.0/0 as IPv4 destination address. The default static path configuration forms the last gateway from the station.

The default static route characteristics are listed in the following:

• It is generally configured on the customer router.
• On the customer network, it is redistributed.
• On BGP the customer route is distributed again and a default route is configured on the customer route.
• It has a manual configuration method.
• The path for the routing is constant or fixed.
• Once it is created then it will be permanent.
• It has no notification system.
• The default static route is considered as one way.

This will help the protocol of routing that it does have to add any kind of redundancy and just add the complexity. On the customer edge router, a default static route exists and points at the interface serial 0. if the serial decreases then the route becomes invalid. in the OSPF procedure, the default-information originate command is executed on the customer route, that’s why the route declares a route in the OSPF for as long as the valid default route is present in it.