Sign Up to our social questions and Answers Engine to ask questions, answer people’s questions, and connect with other people.
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
How To Setup Vlans At Home?
1. Purchase a managed network switch: Start by purchasing a managed network switch that supports VLANs, such as a Cisco or HP switch. 2. Configure the VLANs: Use the command line interface on the switch to configure the VLANs, assigning different ports to different VLANs. 3. Install VLAN-capable rouRead more
1. Purchase a managed network switch: Start by purchasing a managed network switch that supports VLANs, such as a Cisco or HP switch.
2. Configure the VLANs: Use the command line interface on the switch to configure the VLANs, assigning different ports to different VLANs.
3. Install VLAN–capable routers: Install VLAN–capable routers that have multiple Ethernet ports and are capable of creating multiple subnets.
4. Connect the networks: Connect each of the computers or devices to the switch with an Ethernet cable, then connect the switch to the router using another Ethernet cable.
5. Configure the router: Configure the router to forward traffic between the VLANs.
See lessHow To Get The Gold Out Of Computers?
1. Disassemble the computer to get the circuit boards. 2. Use a chemical solvent such as nitric acid to remove the gold from the circuit boards. 3. Rinse the circuit boards with water and separate any gold pieces from other metals. 4. Place the gold pieces in an electrolysis bath to be melted into aRead more
1. Disassemble the computer to get the circuit boards.
2. Use a chemical solvent such as nitric acid to remove the gold from the circuit boards.
3. Rinse the circuit boards with water and separate any gold pieces from other metals.
4. Place the gold pieces in an electrolysis bath to be melted into a nugget or bar.
5. Refine the gold to its purest form and weigh it.
See lessWhat Is 50 Ft Ethernet Cable?
50 ft Ethernet cable is a Category 5e or Category 6 cable that is used to connect a computer or other device to the internet via an Ethernet port. It is most commonly used to create a wired connection between two devices or an internet connection. The cable supports data transfer speeds up to 1000 MRead more
50 ft Ethernet cable is a Category 5e or Category 6 cable that is used to connect a computer or other device to the internet via an Ethernet port. It is most commonly used to create a wired connection between two devices or an internet connection. The cable supports data transfer speeds up to 1000 Mbps, or 1 gigabit per second.
See lessHow Long Can Someone Ddos You For?
The duration of a DDoS attack can vary greatly and is dependent on the motives and resources of the attacker. Some attacks may last a few hours while others can last weeks.
The duration of a DDoS attack can vary greatly and is dependent on the motives and resources of the attacker. Some attacks may last a few hours while others can last weeks.
See lessHow To Tell What Version Of Apache Is Running?
The easiest way to tell what version of Apache is running is to open the terminal and run the command "apachectl -v" or "httpd -v". This command will print out the version of Apache that is running.
The easiest way to tell what version of Apache is running is to open the terminal and run the command “apachectl –v“ or “httpd –v“. This command will print out the version of Apache that is running.
See lessHow To Install Telnet On Centos 7?
1. First, make sure that you are logged into your CentOS 7 system as an administrator (or root). 2. Then open Terminal and enter the following command to install Telnet: sudo yum install telnet -y 3. Once the installation is complete, you can use the telnet command in the Terminal. 4. To check the TRead more
1. First, make sure that you are logged into your CentOS 7 system as an administrator (or root).
2. Then open Terminal and enter the following command to install Telnet:
sudo yum install telnet –y
3. Once the installation is complete, you can use the telnet command in the Terminal.
4. To check the Telnet version, run the following command in Terminal:
telnet –v This will output the version information of the Telnet command.
See lessHow To Use Wireshark To Capture Packets?
1. Download and install Wireshark on your computer. 2. Connect your computer to the network you want to capture packets from. 3. Launch Wireshark and click Capture > Interfaces. 4. Select the interface you want to capture packets from and click Start. 5. You will now start seeing all the packetsRead more
1. Download and install Wireshark on your computer.
2. Connect your computer to the network you want to capture packets from.
3. Launch Wireshark and click Capture > Interfaces.
4. Select the interface you want to capture packets from and click Start.
5. You will now start seeing all the packets being sent and received on the network.
6. You can filter the packets by typing in specific criteria such as IP address, port number, etc.
7. You can also save the captured data in a .pcap file for further analysis.
See lessIn Coaxial Cabling, What Does The Rg Rating Measure?
RG (Radio Guide) ratings measure the quality of a coaxial cable. RG ratings are used to identify the diameter of the center conductor, insulation type, and shield type of the cable. The higher the RG rating, the better the quality of the cable and the better performance it provides.
RG (Radio Guide) ratings measure the quality of a coaxial cable. RG ratings are used to identify the diameter of the center conductor, insulation type, and shield type of the cable. The higher the RG rating, the better the quality of the cable and the better performance it provides.
See lessHow To Turn On Developer Mode Ios?
To enable Developer Mode on an iOS device, open the Settings app and select the General option. From here, scroll down to the bottom of the page and tap on the Developer section. Turn on Developer Mode by tapping the toggle switch at the top of the page.
To enable Developer Mode on an iOS device, open the Settings app and select the General option. From here, scroll down to the bottom of the page and tap on the Developer section. Turn on Developer Mode by tapping the toggle switch at the top of the page.
See lessThe Data Link Layer Utilizes What Name?
The Data Link Layer is part of the OSI Model and is responsible for providing reliable data transfer through its layer of services. It is also known as the Layer 2 of the OSI Model.
The Data Link Layer is part of the OSI Model and is responsible for providing reliable data transfer through its layer of services. It is also known as the Layer 2 of the OSI Model.
See less