Sign Up to our social questions and Answers Engine to ask questions, answer people’s questions, and connect with other people.
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
How To Test If Switch Is Working?
The simplest way to test if a switch is working is to use a multimeter. Set the multimeter to measure resistance (ohms) and place a test lead on each of the terminals of the switch. When the switch is open, there should be a high resistance reading, usually greater than 10k ohms. When the switch isRead more
The simplest way to test if a switch is working is to use a multimeter. Set the multimeter to measure resistance (ohms) and place a test lead on each of the terminals of the switch. When the switch is open, there should be a high resistance reading, usually greater than 10k ohms. When the switch is closed, the resistance should be close to zero. If the reading does not change or is constantly higher or lower than expected, the switch may not be working properly.
See lessHow To Configure Dhcp Relay Agent?
1. Open the DHCP server. 2. Create a new instance of a DHCP Relay Agent. 3. Configure the IP address of the relay agent. 4. Set the default gateway for the DHCP Relay Agent. 5. Specify the range of IP addresses that are allocated from the DHCP server. 6. Select the forwarding protocol for the serverRead more
1. Open the DHCP server.
2. Create a new instance of a DHCP Relay Agent.
3. Configure the IP address of the relay agent.
4. Set the default gateway for the DHCP Relay Agent.
5. Specify the range of IP addresses that are allocated from the DHCP server.
6. Select the forwarding protocol for the server.
7. Specify any additional options that need to be set on the DHCP server.
8. Select any filters that will be used to control access to the DHCP server.
9. Configure the logging settings for the DHCP Relay Agent.
10. Save and apply the changes.
See lessHow Much Data Does An Audio Call Use?
The amount of data used for an audio call depends on the length of the call and the type of connection you are using. Generally, one minute of an audio call over a 3G network uses about 0.3 megabytes (MB) of data, and one minute of an audio call over a 4G network uses about 0.5 MB of data.
The amount of data used for an audio call depends on the length of the call and the type of connection you are using. Generally, one minute of an audio call over a 3G network uses about 0.3 megabytes (MB) of data, and one minute of an audio call over a 4G network uses about 0.5 MB of data.
See lessOn Which Port Does Dns Run?
DNS typically runs on port 53.
DNS typically runs on port 53.
See lessHow To Disable Firewall On Linksys Router?
1. Log into the web-based setup page of your Linksys Router. 2. Select "Firewall" tab from the left navigation. 3. Click on the “Edit Firewall Settings” option and make sure the “Firewall Protection” box is unchecked. 4. Click the “Save Settings” button. 5. Finally, click the “Reboot Router” buttonRead more
1. Log into the web–based setup page of your Linksys Router.
2. Select “Firewall“ tab from the left navigation.
3. Click on the “Edit Firewall Settings” option and make sure the “Firewall Protection” box is unchecked.
4. Click the “Save Settings” button.
5. Finally, click the “Reboot Router” button to save your settings. The Linksys router will now reboot and the Firewall will be disabled.
See lessLinux How To Remove a File?
1. To remove a file in Linux, you can use the 'rm' command. Syntax: rm [options] [file(s)] Example: rm myfile.txt 2. You can also use the 'unlink' command to delete a file. Syntax: unlink [options] [file(s)] Example: unlink myfile.txt
1. To remove a file in Linux, you can use the ‘rm‘ command. Syntax: rm [options] [file(s)] Example: rm myfile.txt
2. You can also use the ‘unlink‘ command to delete a file. Syntax: unlink [options] [file(s)]
Example: unlink myfile.txt
See lessLinux How To See Cpu Usage?
To see CPU usage in Linux, you can use the top command. This will give you an overview of the CPU usage on your system. You can also use the mpstat or sar commands to get more detailed information ab
To see CPU usage in Linux, you can use the top command. This will give you an overview of the CPU usage on your system. You can also use the mpstat or sar commands to get more detailed information ab
See lessHow To Identify Crossover Ethernet Cable?
The easiest way to identify a crossover Ethernet cable is by examining the ends of the cable. Crossover Ethernet cables are designed with different wire arrangement than regular Ethernet cables. The ends of crossover Ethernet cables will typically feature two color schemes swapped from one another:Read more
The easiest way to identify a crossover Ethernet cable is by examining the ends of the cable. Crossover Ethernet cables are designed with different wire arrangement than regular Ethernet cables. The ends of crossover Ethernet cables will typically feature two color schemes swapped from one another: one end will have the order of black/green, white/blue, orange, and brown while the other end will reverse this order so it will be brown/blue, white/green, orange, and black.
See lessHow To Setup a Lan Connection Between Two Computers?
1. First, make sure both computers are connected to the same router or switch. 2. On both computers, open the Network Connections window (Control Panel > Network and Internet > Network Connections). 3. On both computers, right-click on the existing local area network connection, and select ProRead more
1. First, make sure both computers are connected to the same router or switch.
2. On both computers, open the Network Connections window (Control Panel > Network and Internet > Network Connections).
3. On both computers, right–click on the existing local area network connection, and select Properties.
4. In the Local Area Connection Properties window, select the Sharing tab.
5. Check the “Allow other network users to connect through this computer’s internet connection” option.
6. Select the appropriate connection from the Home Networking Connection dropdown menu.
7. Click OK.
8. If the other computer has already been set up for networking, you should see the icon for the new connection in the Network Connections window.
9. Double–click the connection icon to open its properties window.
10. Enter appropriate security information if necessary.
11. Make sure the Status of the connection is Connected.
12. Right–click on the connection again and select Properties.
13. Click on the Sharing tab and select the “Allow other network users to control or disable the shared internet connection” option.
14. Click OK to save your settings.
15. Your computers should now be connected via the local area net
See lessHow Do You Connect a Router To The Internet?
1. Determine the type of Internet connection you have. This will determine which type of router you need. 2. Connect the router to the modem. Depending on the type of router and modem, you may use an Ethernet cable or a coaxial cable. 3. Connect the power cord to the router and plug it into the wallRead more
1. Determine the type of Internet connection you have. This will determine which type of router you need.
2. Connect the router to the modem. Depending on the type of router and modem, you may use an Ethernet cable or a coaxial cable.
3. Connect the power cord to the router and plug it into the wall outlet.
4. Use the Ethernet cable to connect your computer to one of the router‘s Ethernet ports.
5. Log into the router‘s settings page by typing the IP address into a web browser.
6. Enter the username and password of your Internet service provider.
7. Set up a basic security measure like a firewall or WPA2 encryption, if available.
8. Save your settings and restart the router.
9. Confirm that you can access the internet from your computer.
See less