Sign Up to our social questions and Answers Engine to ask questions, answer people’s questions, and connect with other people.
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
How Long Will Windows 7 Be Supported By Microsoft?
Microsoft officially ended support for Windows 7 on January 14th, 2020.
Microsoft officially ended support for Windows 7 on January 14th, 2020.
See lessHow To Crimp An Ethernet Cable?
1. Gather the tools you need to crimp the Ethernet cable. You will need an Ethernet cable, a crimping tool, and a cable stripper. 2. Strip off a small amount of the cable’s outer sheath to expose the four twisted pairs of wires inside. 3. Separate the four twisted pairs of wires and untwist them. 4.Read more
1. Gather the tools you need to crimp the Ethernet cable. You will need an Ethernet cable, a crimping tool, and a cable stripper.
2. Strip off a small amount of the cable’s outer sheath to expose the four twisted pairs of wires inside.
3. Separate the four twisted pairs of wires and untwist them.
4. Trim each wire to the same length, leaving about 1/2 inch of wire exposed.
5. Slide the RJ45 connector onto the end of the cable, making sure that each wire is aligned with the appropriate pin.
6. Place the connector in the crimping tool and squeeze the handles together.
7. Check the connections by gently tugging on the wires.
8. Repeat Steps 2 through 7 for the other end of the cable.
See lessWhat Are The Three Functions That a Computer Program Performs?
1. Input: A computer program can accept data from a user, another program, or a device. 2. Processing: A computer program can take the data, manipulate it, and produce an output. 3. Output: A computer program can display the results of its processing to the user, another program, or a device.
1. Input: A computer program can accept data from a user, another program, or a device.
2. Processing: A computer program can take the data, manipulate it, and produce an output.
3. Output: A computer program can display the results of its processing to the user, another program, or a device.
See lessHow To Connect To a Lan Server?
Step 1: Connect the LAN server to your local network using an Ethernet cable. Step 2: Open the Start menu and type “cmd” in the search bar. Press enter. Step 3: Type “ipconfig” and press enter. Note down the IP address of the LAN server. Step 4: Open the Run dialog box by pressing Windows Key+R. SteRead more
Step 1: Connect the LAN server to your local network using an Ethernet cable.
Step 2: Open the Start menu and type “cmd” in the search bar. Press enter.
Step 3: Type “ipconfig” and press enter. Note down the IP address of the LAN server.
Step 4: Open the Run dialog box by pressing Windows Key+R.
Step 5: Type “\\[IP address]” and press enter.
Step 6: Enter the username and password of the LAN server to access it.
See lessHow To Setup Tp Link 5 Port Switch?
1. Connect the power adapter to the TP-Link 5-Port Switch. 2. Connect the Ethernet cables to the ports on the back of the switch. 3. Connect the other end of the Ethernet cables to the computers or other network devices. 4. Turn on the switch and wait for it to boot up. 5. Once the switch is bootedRead more
1. Connect the power adapter to the TP-Link 5-Port Switch.
2. Connect the Ethernet cables to the ports on the back of the switch.
3. Connect the other end of the Ethernet cables to the computers or other network devices.
4. Turn on the switch and wait for it to boot up.
5. Once the switch is booted up, it should be ready for use.
See lessHow To Add Group In Linux?
1. Open the terminal window. 2. Type in the command “sudo groupadd <groupname>”. 3. Enter your password when prompted. 4. You will see the message “group created successfully”. 5. To add a user to the group, use the command “sudo usermod -a -G <groupname> <username>”. 6. The user wRead more
1. Open the terminal window.
2. Type in the command “sudo groupadd <groupname>”.
3. Enter your password when prompted.
4. You will see the message “group created successfully”.
5. To add a user to the group, use the command “sudo usermod -a -G <groupname> <username>”.
6. The user will now be added to the group.
See lessWhich Statement Is True About Hacking?
Hacking is the practice of gaining unauthorized access to digital systems, networks, or devices.
Hacking is the practice of gaining unauthorized access to digital systems, networks, or devices.
See lessHow To Copy Switch Configuration To Another Switch?
1. Connect to the switch you want to copy the configuration from using a console cable. 2. Log in and enter the "enable" mode. 3. Enter the command "show running-config". 4. Copy the output to a text file. 5. Connect to the switch you want to copy the configuration to using a console cable. 6. Log iRead more
1. Connect to the switch you want to copy the configuration from using a console cable.
2. Log in and enter the “enable” mode.
3. Enter the command “show running-config”.
4. Copy the output to a text file.
5. Connect to the switch you want to copy the configuration to using a console cable.
6. Log in and enter the “enable” mode.
7. Enter the command “configure terminal”.
8. Enter the command “copy tftp://<TFTP_SERVER_IP>/<CONFIG_FILE> running-config”.
9. Enter the TFTP server IP address and the configuration file name when prompted.
10. Wait for the copy process to complete.
11. Verify the configuration has been successfully copied with the command “show running-config”.
See lessHow Does Wifi Work On a Plane?
Most airplanes are equipped with a special wireless router that passengers can access. This router connects to a satellite connection, which provides a more stable connection than traditional ground-based connections. The satellite connection is usually provided by a company specializing in in-flighRead more
Most airplanes are equipped with a special wireless router that passengers can access. This router connects to a satellite connection, which provides a more stable connection than traditional ground-based connections. The satellite connection is usually provided by a company specializing in in-flight internet services. When a passenger connects to the router, the router authenticates the user and assigns them an IP address. The user then has access to the internet, though it is usually limited and slower than what they would experience at home.
See lessHow To Set Dns On Router?
1. Log into your router. 2. Go to the Basic Setup tab. 3. Look for the DNS Settings section. 4. Select the Use These DNS Servers radio button. 5. Enter the primary and secondary DNS servers provided by your ISP. 6. Click the Apply button.
1. Log into your router.
2. Go to the Basic Setup tab.
3. Look for the DNS Settings section.
4. Select the Use These DNS Servers radio button.
5. Enter the primary and secondary DNS servers provided by your ISP.
6. Click the Apply button.
See less