Sign Up to our social questions and Answers Engine to ask questions, answer people’s questions, and connect with other people.
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
How Do I Turn On Network Access Protection?
Network Access Protection (NAP) must be turned on in the Windows Server 2008. To do this, the following steps need to be taken: 1. Log into Windows Server 2008 with administrator privileges. 2. Open the Server Manager console. 3. Select “Roles” from the left navigation pane. 4. Select “Network PolicRead more
Network Access Protection (NAP) must be turned on in the Windows Server 2008. To do this, the following steps need to be taken:
1. Log into Windows Server 2008 with administrator privileges.
2. Open the Server Manager console.
3. Select “Roles” from the left navigation pane.
4. Select “Network Policy and Access Services” role.
5. Click “Add Role Services” button.
6. Double–click on “Network Access Protection (NAP)” component.
7. Select “Next”, followed by “Install” to complete the installation.
8. Once the installation is done, you can configure the NAP policy from within the Server Manager console.
See lessWhich Three Settings Must Match In Order For Switch Ports To Form An Etherchannel? (Choose Three.)?
1. VLAN configuration 2. Speed 3. Duplex
1. VLAN configuration
2. Speed
3. Duplex
See lessWhich Of The Following Are Security Devices That Perform Stateful?
1. Firewalls 2. Intrusion Detection Systems (IDS) 3. Network Address Translation (NAT) 4. Virtual Private Networks (VPNs)
1. Firewalls
2. Intrusion Detection Systems (IDS)
3. Network Address Translation (NAT)
4. Virtual Private Networks (VPNs)
See lessWhich Statement Describes a Characteristic Of Gddr Synchronous Dynamic Ram?
GDDRSynchronous Dynamic RAM is a type of synchronous dynamic RAM (SDRAM) that is optimized to reduce the time it takes to access data stored in the RAM. It is faster than asynchronous dynamic RAM (DRAM) and more reliable than static RAM (SRAM).
GDDRSynchronous Dynamic RAM is a type of synchronous dynamic RAM (SDRAM) that is optimized to reduce the time it takes to access data stored in the RAM. It is faster than asynchronous dynamic RAM (DRAM) and more reliable than static RAM (SRAM).
See lessHow To Check Disk Quota In Linux?
1. To check the disk quota in a single user account, simply use the command “quota” or “repquota”. 2. To view the quotas for all users on a system, run the command “quotacheck -a”. 3. To check the quota usage on a specific filesystem, run the command “quotacheck -v /home” (or whichever filesystem yoRead more
1. To check the disk quota in a single user account, simply use the command “quota” or “repquota”.
2. To view the quotas for all users on a system, run the command “quotacheck –a”.
3. To check the quota usage on a specific filesystem, run the command “quotacheck –v /home” (or whichever filesystem you are interested in).
4. To view the amount of space used by a certain user, run the command “quota –u username”.
5. To manually adjust a quota limit, use the command “edquota –u username” (or whichever setting you are interested in).
See lessHow Do I Reset My Cisco Voicemail Pin Remotely?
Unfortunately, there is no way to reset your Cisco voicemail PIN remotely. If you need to reset your Cisco voicemail PIN you will need to contact your company's IT department. They should be able to assist you in resetting your PIN.
Unfortunately, there is no way to reset your Cisco voicemail PIN remotely. If you need to reset your Cisco voicemail PIN you will need to contact your company‘s IT department. They should be able to assist you in resetting your PIN.
See lessHow To Close All Ssh Connections In Linux?
1. You can close all SSH connections by running a command in terminal. Open a terminal and execute the following command: $ sudo service ssh stop This will stop the SSH daemon and terminate any existing connections. 2. You can also use the kill command to terminate all SSH connections. Open a terminRead more
1. You can close all SSH connections by running a command in terminal.
Open a terminal and execute the following command:
$ sudo service ssh stop
This will stop the SSH daemon and terminate any existing connections.
2. You can also use the kill command to terminate all SSH connections.
Open a terminal and execute the following command:
$ kill –9 $(pgrep –f “sshd“)
This will terminate all SSH connections.
See lessHow To Delete Bootcamp Files From Mac?
To delete files created during the installation of Bootcamp, you can open the Windows partition in Finder and drag the files to the Trash. If you have already uninstalled Bootcamp and deleted the partition, you may need to use a third party tool such as Disk Drill or CCleaner for Mac to scan for andRead more
To delete files created during the installation of Bootcamp, you can open the Windows partition in Finder and drag the files to the Trash. If you have already uninstalled Bootcamp and deleted the partition, you may need to use a third party tool such as Disk Drill or CCleaner for Mac to scan for and delete any remaining files.
See lessHow Do Train Track Switches Work?
Train track switches, also known as turnouts, connect tracks that allow trains to change direction. When a switch is thrown, one set of rails diverts the train onto an alternate path. The rails of a switch are connected to each other with a switch rod and a switch point. The switch rod is connectedRead more
Train track switches, also known as turnouts, connect tracks that allow trains to change direction. When a switch is thrown, one set of rails diverts the train onto an alternate path. The rails of a switch are connected to each other with a switch rod and a switch point. The switch rod is connected to a switch stand which is what a conductor uses to manually operate the switch. The switch points move when pulled or pushed by the switch rod and can be set to different positions so that the train will change directions. When the switch points are set in one direction, the train will go straight; when they are set in the opposite direction, the train will turn.
See lessHow To Config Vlan In Cisco Switch?
1. Log in to the switch using an administrator account and the correct password. 2. Enter global configuration mode by typing “config t” at the command prompt. 3. Create a new VLAN by typing “vlan [id number]” at the command prompt and pressing Enter. This will also create a default VLAN on the switRead more
1. Log in to the switch using an administrator account and the correct password.
2. Enter global configuration mode by typing “config t” at the command prompt.
3. Create a new VLAN by typing “vlan [id number]” at the command prompt and pressing Enter. This will also create a default VLAN on the switch with the specified ID number.
4. Assign the VLAN an IP address if desired. This will allow other devices on the VLAN to communicate with each other. To do this, type “interface vlan [id number]” and press Enter. Then type “ip address [IP address] [subnet mask]” and press Enter.
5. Assign ports to the VLAN by typing “interface [port number]” and press Enter. Then type “switchport access vlan [id number]” and press Enter.
6. Save changes to the VLAN configuration by typing “wr mem” at the command prompt and pressing Enter. This will store the new VLAN configuration in the flash memory of the switch.
See less